Rocker Panel Camo Vinyl Wraps

Rocker Panel Camo Vinyl Wraps

Rocker Panel Camo Wraps for Trucks

Rocker Panel Camo Wraps from CamoWraps give your truck a rugged upgrade while protecting one of the most vulnerable areas of your vehicle. Available in 16in x 18ft (3 sheets of 16in x 6ft) or 16in x 21ft (3 sheets of 16in x 7ft), these patterned wraps are engineered for seamless design flow from driver side to passenger side. Each kit uses premium outdoor-rated vinyl for durability, style, and easy installation. Proudly made in the USA.

Why Choose CamoWraps for Your Rocker Panels

  • Durable Protection: Guards rocker panels from scratches, gravel, and road debris.
  • Seamless Pattern Flow: Printed in sets of three sheets designed to align across both sides.
  • UV & Weather Tough: Built to resist fading, mud, and wash-downs.
  • Custom Look: Bold camo patterns sized perfectly for rocker panel placement.
  • DIY-Friendly: Air-release adhesive makes installs smoother with basic tools.
  • Made in the USA: Precision printed for crisp details and bold color.

Installation & Pattern Alignment

To ensure a clean, continuous look, it’s important to align your rocker panel sheets carefully. Each kit comes with three vinyl panels designed to flow across the driver and passenger sides.

  1. Lay Out All Three Sheets: Place sheets flat on the ground to examine the pattern. Mark reference points for alignment. Mirror the passenger side sheet so the design flows around the vehicle.
  2. Install Driver Side First: Position the vinyl under the doors, apply with a squeegee, and use heat for curves.
  3. Align Passenger Side: Flip and align the second sheet, matching the pattern elements with the driver side.
  4. Use Third Sheet: Apply to bumpers, bed ends, or keep as a spare for repairs.
  5. Trim & Finish: Cut around wheel wells and seams with a precision knife. Heat and press edges to seal.

For complete instructions with photos, see our Rocker Panel Wrap Installation Guide.

Top Camo Patterns for Rocker Panels

Choose from trusted camo brands and exclusive in-house designs for a rugged, seamless finish.

  • Realtree: Proven concealment with woodland and marsh tones.
  • Kryptek: Tactical designs with layered breakup and depth.
  • A-TACS: Digital patterns engineered for tough terrains.
  • Muddy Girl: High-contrast pink/black with bold style.
  • Veil: Advanced concealment technology for modern vehicles.
  • CamoWraps Originals: Exclusive patterns designed in-house for rocker panel installs.

FAQs

Kits are available in 16in x 18ft (3 sheets of 16in x 6ft) or 16in x 21ft (3 sheets of 16in x 7ft). Each set is printed as a pattern that flows across both sides of your truck.
Lay out all three sheets before starting and mark reference points. Mirror the passenger side sheet to continue the flow across the truck. Carefully align similar elements in the print for a seamless look.
Start with the driver side first. Once aligned and applied, flip the second sheet for the passenger side, matching pattern flow. The third sheet can be used for rear bumpers, bed ends, or kept as a spare.
You’ll need a squeegee, heat gun, masking tape, and a precision knife. Heat helps conform vinyl to curves and edges, while trimming ensures a flush, professional finish.
No—when properly installed and removed with heat, our premium vinyl lifts cleanly from prepped surfaces without damaging paint or clear coat.

 

Customer Showcase (Rocker Panels)


Want to be featured? Share your rocker panel wrap install—pattern, vehicle, and your favorite photo.

Wrap It, Snap It Rewards